October 29, 2015

Phew!! Its been a busy October for me.

A new product is on its way in next month!! So watch out.

Royal-lac Aerosol was also featured in the Scrollsaw Woodworking & Craft, Holiday issue 2015. It was written by the editor of the magazine Bob Duncan. Here is a scan from the magazine page. 

 

October 29, 2015

Bob Hensel, a scrollsaw artist from San Diego sent me some photos of his project that I would like to share. His box was finished with Royal-Lac Aerosol and turned out real good. Here is how Bob describes the process:

Bob: The basic process was to rough cut the wood pieces.  Sand the wood.  Apply a coat of Seal-Lac.  Sand again.  Cut the box out and put it together. I think I applied about 4 light coats of the gloss Royal-Lac spray shellac.  I let each coat dry about an hour and then rubbed it lightly with a soft cloth. I don’t remember exactly how many coats I applied. I just kept applying coats of shellac until my eyes said this is the finish I want.